What is the deep drawing process?The deep drawing process is a stamping method that uses a deep drawing die to press a flat blank into a hollow workpiece with various openings, or to process a manufactured open hollow part into a hollow part of other shapes. Deep drawing is also called stretching.Th

The main features of CNC machining.CNC machine tools selected aircraft parts with complex surfaces as the processing objects from the beginning, solving the key problem that ordinary machining methods are difficult to solve. The biggest feature of CNC machining is to use punched tape (or magnetic ta

Determination of CNC processing routeThe CNC lathe feed processing route refers to the path that the turning tool takes from the tool reference point (or the fixed origin of the machine tool) until it returns to the point and ends the processing program, including the cutting processing path and the

Does the motor housing belong to the stretching process?The motor housing is made by stamping and stretching technology. It is often used as the housing product of the motor inside the water pump. It has certain protection and applicability characteristics. It is widely used in motors used in garden

Drawing of die drawing for metal stamping partsIn a metal stamping parts processing plant, stamping of metal stamping parts requires stamping dies. Today, let's briefly introduce the drawing of the die drawing of this stamping die.After fully analyzing the original data of the metal stamping parts,

Uses of metal stamping parts Stamping in the automotive industry. Mainly deep drawing. In my country, this part is mainly concentrated in large factories such as automobile factories, tractor factories, and aircraft manufacturing plants. Independent large-scale stamping and deep drawing plants are s

that for precision metal stamping workers1. Maintain a good mental stateWhen operating the punch, you must maintain a good mental state, and you must not operate the punch when the mental state is not good. If you have any concerns, you must ask the factory for leave or transfer to another position.

That metal stamping manufacture should pay attention.When a factory operates a punching machine, how can even the punching machine not be fully qualified, and where should safety start? There are mainly the following requirements for equipment:1. The punch runs well lk good punch is the foundation o

For the rust removal of copper stamping parts, the commonly used copper rust removal process is the chemical treatment process. The specific methods are as follows:If there is only a little rust and oil on the copper stamping parts, the following treatment process can be used: copper material rust r

The wide application of the electronics industry is increasingly changing the production and lifestyle of human beings. As hardware terminals in electronic products, their precision and requirements are crucial in electronic products.Selection and differentiation of materials for hardware terminal p