That Metal Stamping Manufacture Should Pay Attention.

That metal stamping manufacture should pay attention.

When a factory operates a punching machine, how can even the punching machine not be fully qualified, and where should safety start? There are mainly the following requirements for equipment:

1. The punch runs well lk

good punch is the foundation of safe production. The lubrication of the punch must be normal; the copper bushes must not be excessively worn; the tightness of the brake must be within a normal range; the clutch and control system are flexible; the bolts of each part must not be loose;

2. Install safety grating

After the safety grating is installed, if the stamper's hand or other items that affect safety enter the dangerous area, the punch will be stopped in an emergency; in the shutdown state, the punch cannot be started.

3. Reasonable switch design

It is necessary to design two start switches and an emergency stop switch, and the two start switches must be a certain distance apart, as long as the stamper presses the two start switches at the same time to start the machine; the emergency stop switch cannot be too far away from the stamper. Otherwise, when a situation arises, the worker cannot stop the punch immediately.

4. Reasonable design of stamping die

If the punch is the first element of safe production, then the stamping die is the second element. The production of stamping parts relies on stamping dies, so the reasonable design of stamping dies plays a vital role in safety.

Whether it is convenient to discharge and return the material smoothly all affect the safety of the factory during operation. When designing the mold, it must be possible to ensure that the factory can easily use tools to discharge and unload.

5. Safety tools must be used

During the stamping process, it is absolutely forbidden to let the hand enter the working area of the mold, which requires the use of safety tools to complete the work of unloading and unloading. The safety tools that are often used now are magnet type, suction cup type and tweezers.

6. Reasonable noise reduction measures

Under the influence of the noise of the punching press for a long time, the concentration and mental state of the factory will continue to decline. Reasonable noise reduction measures can not only ensure the mental state of the stamping workers, but also be responsible for the health of the workers!

7. Establish a safety management system and punch operation manual

Stamping factories must carry out safety training for stamping workers from time to time, so that the concept of safe production can be deeply rooted in the hearts of the people. Help stampers to establish safe operating habits.