Requirements and control principles for the quality of stamping partsSince stamping parts have developed towards large-scale and complex development, the quality requirements for stamping parts have become increasingly stringent. In order to achieve these goals, stamping parts manufacturers have put

Principles for designing stamping parts1. The designed stamping parts must meet the product application and technical functions, and be easy to assemble and repair.2. The designed stamping parts must be conducive to improving the utilization rate of metal materials, reducing the variety and specific

What technical measures need to be met during the metal stamping processWhether it is operation technology or safety, the metal stamping process must meet the corresponding requirements, starting with its technical measures. You should know that the so-called metal stamping is a process that uses a

Causes and treatment methods for uneven surfaces of metal stamping partsThe uneven surfaces of metal stamping parts are mainly caused by dust or iron filings attached to the raw materials or mold surfaces. These iron filings and dust can not only greatly reduce the appearance of stamping products, b

Precautions for stamping parts processingWhen stamping parts are processed and produced, it is important to pay attention to the normal working state when using presses or die and other tooling equipment to prevent the strip material from not being able to be fed along the correct positioning or not

Basic process requirements for metal stamping parts1. The materials used for metal stamping parts should not only meet the technical requirements of product design, but also meet the requirements of stamping process and post-stamping processing requirements (such as cutting, electroplating, welding,

Environmental factors:The parts stamped on rainy days did not rust, but on sunny days they rusted. Environmental factors can be ruled out.

Analysis of factors to be considered in the punching size problem of metal stamping partsThe problem of punching size is encountered in the process of producing metal stamping parts. It is common for the punching size to be too large or too small. In order to solve the problem of punching size of me

Automobile covers belong to stamped parts, and the quality of automobile covers directly affects the quality of the car body. Stamped parts often have some surface quality problems during the stamping process. Automobile covers are prone to some wrinkles (also called ripples or waves) during the stamping and drawing process.

Basic characteristics of metal stamping parts.Many of the products we see in daily life are metal stamping parts, ranging from aircraft carriers, airplanes, and cars to pins.