Basic requirements for stamping process design:1. The material utilization rate should be high, that is, the consumption of original materials should be as low as possible2. Considering the specific production conditions of the factory, the process plan should be technically feasible and economicall

Jiantong stamping new product: junction boxName: junction boxProcess: stampingApplication: used in the electronic and electrical industry.Product size: length 120mm width 60mm height 70mmRaw material: t=0.8mm thick galvanized sheet materialMetal stamping, product shape accuracy ±0.1mm

How to spray paint galvanized parts? Galvanized parts can be directly sprayed during processing.1. You can choose the color of the paint according to your preference. It is recommended to use alkyd primer for the base and alkyd topcoat for the cover.2. The galvanized sheet does not need any processi

Metal end caps for electronic products. product φ 110mm, material thickness is 1.2mm. Through the advantages of the mold,which stretched and formed through two stretching processes. The roundness tolerance of the product can be controlled within 0.05mm.

Testing method of stamping partsPut the stamping parts into the inspection fixture, and inspect the stamping parts according to the operating requirements of the inspection fixture manualIn actual production, process tests similar to the stamping process are often used to test the stamping performan

Characteristics of precision stamping.Precision stamping is a strong edge pressing precision punching. Its process principle is: on a three-action press, with the help of a special structure of precision punching die, under strong force, the material is plastic, sheared, and deformed, thereby obtain

Packaging methods for metal stamping parts1. General packagingWhen metal stamping parts are produced, they are blanking type (only a single finished product), and different packaging materials are used according to product requirements.2. Disc packagingThis packaging is used when the stamping parts

Click on the shell is a stamping and deep drawing processThe motor shell is made by stamping and deep drawing technology. It is often used as the shell product of the motor inside the water pump. It has certain protection and applicability characteristics. It is widely used in motors used in gardens

What are the main processes of metal stamping:1. DrawingA stamping process that turns straight raw materials or process parts into hollow parts, or further changes the shape and size of hollow parts. During drawing, hollow parts are mainly formed by the material outside the bottom of the punch flowi

Why do stamping parts manufacturers debug the mold before production?Stamping parts manufacturers always debug the mold before mass production. Why do they debug the mold?First of all, it is to evaluate the quality of the mold, check whether the quality of the products produced by the mold county me