You are here: Home » News » Product News » Common Defects in Stamping Parts Bending

Common Defects in Stamping Parts Bending

Views: 0     Author: KAISHI     Publish Time: 2025-01-24      Origin: Kaishi

Common Defects in Stamping Parts Bending

Common defects in stamping parts bending

Defects: unqualified bending angle, cracked bending edge, steps at the bending R angle, etc.

1. Unqualified bending angle → The gap between the male and female dies is too large, the matching angle of the male and female dies does not match, and the thickness of the plate material is uneven.

2. Broken bending edge → The gap between the male and female dies is too small; the bending angle is too small; the punching force is too large and the speed is too fast; the plate material is too hard.

3. There is a step at the bending R angle → The bending angle of the male and female dies is too large; the outer R angle is too large; the bending force is too small.


About Our Company

Our experienced engineering team will provide you technical assistance to optimize your design and support your application to work out the best solution and control your purchasing cost.

QUICK LINKS

PRODUCTS

CONTACT US

:+86-137-2273-0310
:West Village, Xisanli Village, Nanpi Town, Cangzhou, Hebei, China
Copyright © 2023  Kaishi Hardware Manufacturing. All Rights Reserved.Privacy Policy